Who Makes Hoka Shoes? A Complete Brand Guide
Contents
Most people assume a shoe company makes its own shoes. In reality, that’s rarely how it works across the trail-runner market. The gap between a ‘waterproof’ label and a jacket that actually keeps rain out over a long downpour is wide. Water-resistant and genuinely waterproof membranes are built differently, and only one of them holds up through hours of mountain riding. That distinction is exactly why it pays to look deeper at who actually builds the gear you trust. So the answer to who makes Hoka shoes is more than a brand name; it is a whole manufacturing chain.
Key Takeaways
- Hoka is owned by Deckers Brands, the same parent company as UGG and Teva.
- Manufacturing happens primarily in Vietnam and China, with strict quality control.
- The brand’s signature oversized midsole is designed for maximum cushioning and stability over long distances.
Who Actually Owns Hoka?
Hoka One One — now just Hoka — was founded in 2009 by two French trail runners, Nicolas Mermoud and Jean-Luc Diard. They wanted a shoe that could handle steep alpine descents without destroying your knees. In 2013, Deckers Brands bought the company for a reported $110 million. Deckers also owns UGG, Teva, and Sanuk, so Hoka sits in a portfolio of comfort-focused footwear.
Deckers doesn’t mess with the design DNA much. Hoka’s R&D team still operates semi-independently in Goleta, California, and Annecy, France. The parent company provides the capital and supply chain muscle, but the shoe engineers keep control over the foam compounds and outsole patterns.
Where Are Hoka Shoes Made?
Hoka manufactures the vast majority of its shoes in Vietnam and China. A smaller percentage comes from Indonesia and Bangladesh.
Each factory follows Deckers’ code of conduct, which includes regular third-party audits for labor practices and environmental standards. The uppers are typically assembled in one facility, then the midsoles and outsoles are attached in another before final inspection.
How Hoka Shoes Are Made: The Key Materials
The Midsole Foam
Hoka’s signature is that thick, oversized midsole. It’s made from a blend of EVA (ethylene-vinyl acetate) foam, sometimes mixed with rubber for added durability. The foam is injected into a mold under heat and pressure, creating a lightweight but resilient cushion layer.
After 300 miles, most EVA foams lose about 15-20% of their bounce. Hoka’s proprietary formulations, like the Profly+ used in the Bondi series, hold up better than standard EVA. These formulations retain a high level of cushioning even after extended use on gravel roads.
The Outsole Rubber
Hoka uses Vibram rubber on many trail models, particularly the Speedgoat and Mafate. Vibram is an Italian company that’s been making outsoles since 1937. The lugs are spaced widely to shed mud, and the rubber compound is formulated for wet-rock traction.
Road shoes like the Clifton use a softer blown rubber that wears faster but grips pavement better. The Clifton outsole typically wears through sooner than the Speedgoat outsole, which has lugs that last longer before smoothing out.
The Upper Mesh
Hoka uses engineered mesh for the upper, which is a single-layer fabric with variable-density weaving. This gives breathability where you need it and structure where you don’t. The mesh is bonded to the midsole using a hot-melt adhesive, not stitched, which reduces weight and prevents water intrusion at the seam.
Because the upper is built from mesh rather than a waterproof membrane, in a creek crossing water will seep through the mesh itself within minutes. That’s normal for non-waterproof trail runners.
Why Hoka’s Design Philosophy Matters for Riders
The cushioning in Hoka shoes, designed for trail runners on long ultras, also provides effective foot protection and comfort during extended periods of standing or walking over rough terrain.
The rocker shape — that curved sole that rocks you forward — reduces fatigue in your calves and Achilles. Over an eight-hour day of riding, that geometry is what separates a rocker sole from a flat-soled boot: a flat sole holds the ankle at one fixed angle and leaves the calf and Achilles loaded the whole time, while a rocker lets the foot roll through its natural range instead of fighting to. The wide base does the same job laterally, giving a stable platform to push against when a bike has to be walked through a muddy section.
How Hoka Compares to Other Brands
Hoka competes directly with Brooks, Saucony, and Asics in the maximalist cushion category. But Hoka’s shoes are generally lighter than Brooks’ Glycerin series and have a lower drop (the height difference between heel and toe). Most Hoka road shoes have a 5mm drop, which encourages a midfoot strike.
For trail running, Hoka’s outsole grip is considered better than Saucony’s Peregrine series in wet conditions. The Vibram megagrip compound provides superior traction on slick surfaces.
On durability, Hoka shoes tend to wear out faster than Brooks because the foam is softer. Runners commonly get around 300-500 miles from a pair of road shoes, and the exact figure depends on body weight, gait and surface. But the ride is more comfortable for the first 300 miles.
Frequently Asked Questions
Who makes Hoka shoes?
Hoka shoes are made by Deckers Brands, a publicly traded company based in Goleta, California. The shoes are manufactured in factories in Vietnam, China, Indonesia, and Bangladesh under Deckers’ oversight. The brand was originally founded by French trail runners Nicolas Mermoud and Jean-Luc Diard.
Are Hoka shoes made in the USA?
No, Hoka does not manufacture any shoes in the United States as of 2026. All production happens in Asia, primarily Vietnam and China. The design and R&D work happens in California and France, but the actual assembly is overseas.
Is Hoka owned by Nike or Adidas?
No, Hoka is owned by Deckers Brands, not Nike or Adidas. Deckers also owns UGG, Teva, and Sanuk. Hoka operates as a separate division within Deckers with its own design team and brand identity.
